Valve Entrance & Exit with 3/8″ Male Flare Thread Working Pressure: 1/2″PSI (65Mbar Max) Operation Instructions
1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange.
2). Connect your inlet and outlet hose on inlet and outlet side. (faston it tightly enough in case of gas leakage)
3). Faston the thermocouple nut M8 at the valve end tightly (Check if your valve end thread if 8mm before you purchase)
4). Connect thermocouple and end thread well
5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it work properly
If whilst you release hand, gas valve shut off again, Please check
a. If your thermocouple is at all times be heated on flame
b. If the thermocouple end is well connect with valve
c. If the inlet and outlet side well connect with hose you have
！！！ The valve max working pressure 1/2 PSI, it is just for flame failure safety designed fire pit. NOT suitable for Natural gas.
The valve isn’t include Pilot connection, Just inlet and outlet, compare your design before ordering!
Make sure this fits by entering your model number.
For Low Working Pressure Max 1/2 PSI , CE&CSA Certified Main Keep watch over Valve Inlet & Outlet with 3/8″ Male Flare
Valve Spindle “D” Shaft for 6mm Knob,With M15 Nut to Fix on your Panel Plate
Suitable for Low Pressure Repair Keep watch over System for Grill, Fire Pit, Fireplace & Heater (Max BTU rating: 50000)
Made of Brass more Durable Can connect Standard DN10 corrugated flex line and 3/8″ Female regulator hose straight away by hands
Thermoelectric Valve is a low pressure valve rated around 50000BTU wish to work with thermocoupler, Please confirm your system before order to keep away from return